Friends,
As I have been delving deeper into the realm of 1860's era sewing I have been examining a piece of reproduction clothing made by Pat Brown. They are a pair of Boylan contract trousers that are completely hand sewn, and as I was examining the seam construction I noticed that Mr. Brown used small half backstitches that did not touch, rather than the regular back stitch that resembles machine sewing. When pulled apart the seam shows the thread crossing in almost perfect tiny X's. I would like to ask Mr. Brown this question, as he has the research to back his techniques up, but unfortunately he is somewhere over in Iraq and I cannot get a in contact with him.
My question is, having few options to examine original garments out here in Utah, have any of you come across original military items that were sewn on their main seams with a half backstitch rather than the more conventional stitch? Searching the internet I could find only one picture that resembles the construction of my trousers and that is located here:
http://www.gallarock.com/GettysburgC...ratePants.html (it is the 15th picture down the page showing an interior seam allowance held up to expose the stitching)
The doubt I have about the picture of the CS trousers is that I cannot tell if the stitches were sewn back through the same hole as the last stitch and then simply spread the yarns of the fabric slightly, causing the appearance of half back stitches.
I don’t mean to sound knit picky, but this little detail of construction interests me. Pictures that you may have of seam stitching on military garments are much appreciated!
Chase Pinkham
As I have been delving deeper into the realm of 1860's era sewing I have been examining a piece of reproduction clothing made by Pat Brown. They are a pair of Boylan contract trousers that are completely hand sewn, and as I was examining the seam construction I noticed that Mr. Brown used small half backstitches that did not touch, rather than the regular back stitch that resembles machine sewing. When pulled apart the seam shows the thread crossing in almost perfect tiny X's. I would like to ask Mr. Brown this question, as he has the research to back his techniques up, but unfortunately he is somewhere over in Iraq and I cannot get a in contact with him.
My question is, having few options to examine original garments out here in Utah, have any of you come across original military items that were sewn on their main seams with a half backstitch rather than the more conventional stitch? Searching the internet I could find only one picture that resembles the construction of my trousers and that is located here:
http://www.gallarock.com/GettysburgC...ratePants.html (it is the 15th picture down the page showing an interior seam allowance held up to expose the stitching)
The doubt I have about the picture of the CS trousers is that I cannot tell if the stitches were sewn back through the same hole as the last stitch and then simply spread the yarns of the fabric slightly, causing the appearance of half back stitches.
I don’t mean to sound knit picky, but this little detail of construction interests me. Pictures that you may have of seam stitching on military garments are much appreciated!
Chase Pinkham
Comment