Tweet
Confederate Brass Framed Revolvers: Myths & Realities, Part 3.
This is a story of somewhat of myth looking to justify somewhat a reality. In other words, a Confederate brass framed clone not a copy of a Colt M1851 Navy revolver.
Once again the story of Confederate gunsmiths pops up with the question of patriotism and profit. And certainly falls in line with a number of gunsmiths in the South thinking that since they were already altering flintlocks to percussion, reboring shot out bores, repairing, and refinishing guns of all types for the Confederacy looking to go into the revolver business.
One of the smallest, and briefest was Schneider and Glassick of Memphis, TN.
William Schneider and Frederick Glassick had been independent gunsmiths plying the Mississippi River trade before the War apparently making and selling derringers as well as guns made by others. By 1860 they were listed in the Memphis City Directory as “Schneider & Glassick, guns, pistols, etc.”
In the December 8, 1861 Memphis Daily Appeal ran a very short article praising “a beautiful weapon, not inferior to Colt’s make in any particular.”
It is not clear how many revolvers S & G made, but historians questimate production at one revolver a week for either less than 20 but certainly no more than 55-55. While starting in December of 1861, things ran until the beginning of March 1862
In any event, the ‘Daily Appeal” ran a notice from Schneider & Glassick On March 7, 1862 that they were closing down and customers should come in to collect their guns by the 13th as they would be turned over to the Confederacy.
By March 15, 1862 Memphis was in Union hands and Schneider and Glassick were done.
Originals S & G’s are very rare. Among the four or five (?) there are mystery variations such as two with brass frames but with iron grip frame and trigger guard. And one with an iron grip frame and trigger guard, has a round rather than octagonal barrel.
Reproductions.
Here is the Kicker. In the rush to offer a cheaper reproduction Colt revolver, the Italians inadvertently created the ‘Schneider and Glassick” revolver when they decided to offer a Colt M1851 Navy with a brass frame at a lower price.
Once again the usual shortcomings and complaints with Italian reproduction revolvers still stand.
All in all, and up to a point, a brass framed Colt M1851 Navy can be (so-called) "de-farbed" to be more "S & G like" by removing the naval battle scene from the cylinder. etc.
Although a historical reality, a “Schneider & Glassick” reproduction revolver is near universally frowned upon and looked down on in reenacting and living history. ANY brass framed Colt M1851 Navy reproduction can assume the name and identity of a Schneider & Glassick.
However, with no more than 50 possibly made, and with the highest serial number fund on an original is 23 hinting that less may have been turned out, it is not considered Plain, Everyday, and Common or not "quite" Period Correct or Authentic as a choice.
References:
Albaugh, William, A. III, The Confederate Brass-Framed Colt & Whitney. Broadfoot Publishing Company, Wilmington, NC. 1955
Albaugh, William, A. III, Benet, Hugh. Jr, Simmons, Edward. Confederate Handguns. George Shumway, Publisher, York, PA. 1963
Curt
This is a story of somewhat of myth looking to justify somewhat a reality. In other words, a Confederate brass framed clone not a copy of a Colt M1851 Navy revolver.
Once again the story of Confederate gunsmiths pops up with the question of patriotism and profit. And certainly falls in line with a number of gunsmiths in the South thinking that since they were already altering flintlocks to percussion, reboring shot out bores, repairing, and refinishing guns of all types for the Confederacy looking to go into the revolver business.
One of the smallest, and briefest was Schneider and Glassick of Memphis, TN.
William Schneider and Frederick Glassick had been independent gunsmiths plying the Mississippi River trade before the War apparently making and selling derringers as well as guns made by others. By 1860 they were listed in the Memphis City Directory as “Schneider & Glassick, guns, pistols, etc.”
In the December 8, 1861 Memphis Daily Appeal ran a very short article praising “a beautiful weapon, not inferior to Colt’s make in any particular.”
It is not clear how many revolvers S & G made, but historians questimate production at one revolver a week for either less than 20 but certainly no more than 55-55. While starting in December of 1861, things ran until the beginning of March 1862
In any event, the ‘Daily Appeal” ran a notice from Schneider & Glassick On March 7, 1862 that they were closing down and customers should come in to collect their guns by the 13th as they would be turned over to the Confederacy.
By March 15, 1862 Memphis was in Union hands and Schneider and Glassick were done.
Originals S & G’s are very rare. Among the four or five (?) there are mystery variations such as two with brass frames but with iron grip frame and trigger guard. And one with an iron grip frame and trigger guard, has a round rather than octagonal barrel.
Reproductions.
Here is the Kicker. In the rush to offer a cheaper reproduction Colt revolver, the Italians inadvertently created the ‘Schneider and Glassick” revolver when they decided to offer a Colt M1851 Navy with a brass frame at a lower price.
Once again the usual shortcomings and complaints with Italian reproduction revolvers still stand.
All in all, and up to a point, a brass framed Colt M1851 Navy can be (so-called) "de-farbed" to be more "S & G like" by removing the naval battle scene from the cylinder. etc.
Although a historical reality, a “Schneider & Glassick” reproduction revolver is near universally frowned upon and looked down on in reenacting and living history. ANY brass framed Colt M1851 Navy reproduction can assume the name and identity of a Schneider & Glassick.
However, with no more than 50 possibly made, and with the highest serial number fund on an original is 23 hinting that less may have been turned out, it is not considered Plain, Everyday, and Common or not "quite" Period Correct or Authentic as a choice.
References:
Albaugh, William, A. III, The Confederate Brass-Framed Colt & Whitney. Broadfoot Publishing Company, Wilmington, NC. 1955
Albaugh, William, A. III, Benet, Hugh. Jr, Simmons, Edward. Confederate Handguns. George Shumway, Publisher, York, PA. 1963
Curt