Announcement

Collapse
No announcement yet.

Announcement

Collapse
No announcement yet.

Sources for correct Ordnance Green Paint?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Re: Sources for correct Ordnance Green Paint?

    Thank you again to all (on and off list) who provided information!

    John Novicki


    John Novicki
    Co. C, 2nd U.S.S.S.

    Comment


    • #17
      Re: Sources for correct Ordnance Green Paint?

      Originally posted by CavLt
      John,

      I have been told that pittsburgh paint has color called dock piling #7631 that is a good representation.
      Personally, I can not vouch for it, and do not recall who gave me this information. But, it might be worth picking up a color chip to compare to an original piece.

      Jay Johnson
      Hi,

      I don't have a Pittsburg Paint store by my house so on a lark, I asked the guy at the local home center's paint counter if they were able to 'cross reference' colors (I knew that they could scan a sample, but I had no sample).

      I told him 'dock piling #7631', and it came right up on his list! It gets even better: this particular store carries Olympic paint which is actually made by (can you guess it?) - Pittsburg paint.

      So if you don't have a Pittsburg dealer near by, look for Olympic.

      Roger M. Nichols
      rnichol7@hotmail.com

      Comment


      • #18
        Re: Sources for correct Ordnance Green Paint?

        Dear Friends,

        Having started this thread, I am remiss in not following up on it. I decided the way to go was to make the paint using the Ordnance Department formula supplied by helpful members of the forum.. It was a royal pain in the --- but was a great learning experience (whom amoung us has ever needed to make paint?) and produced a material that I am very satisfied with.

        The yellow ochre was especially "fun" to grind. When I tried the composition as the yellow ochre came from the masonry supplier, the paint came out too grainy. Starting over, I spent hours grinding the stuff (ochre) so that it went from a grit to a powder. I later found that you can get ochre from art supply houses in a much finer size but costs almost an order of magnitude more . . .

        Once properly prepared, the paint went on well but required three coats for good coverage. It took longer to dry than I might have wished. More drying agents would have helped but I was uncertain about doing that given the amount of work (grinding, grinding, grinding) to prepare the large batch of material.

        If anyone is interested, I will paint a few pieces of wood with the stuff and you can get it matched at your local paint supply house. I will bring them along to events. If you see the ambulance, just ask.


        John Novicki
        Co. C, 2nd U.S.S.S.

        Comment

        Working...
        X